Besjaar Rain Shower with Hose: replace your shower head and hose in one go

The Besjaar Rain Shower with Hose is a complete set: a chrome shower head with 3 settings and a flexible 1.5 metre hose with anti-twist protection.

Besjaar Regendouche met Slang: verchroomde douchekop met 3 standen en flexibele slang van 1,5 meter

Is it not just your shower head but your shower hose too that needs replacing? Then you'd rather sort it all out in one go. That's what the Besjaar Rain Shower with Hose is for: a complete set you fit yourself in a few minutes.

What's in the set?

You get a chrome shower head with three settings and a wide 13 centimetre head, plus a flexible 1.5 metre shower hose. Two washers and a water-saving insert are included too. So you don't need anything else to get started.

When should you replace your hose as well?

A shower hose lasts a long time, but not forever. Replace it if you notice any of these:

  • It leaks at the connection, even with a new washer.
  • It kinks or keeps twisting into knots.
  • It has become stiff or has small cracks.

A kinked or damaged hose can also reduce the water flow. Read more in low water pressure in the shower.

What do you notice in the shower?

  • Three settings: soft rain, massage and a strong power spray. You switch with one button.
  • Full spray, limited use: air is mixed into the spray, which uses no more than 8 litres of water per minute.
  • Freedom of movement: the 1.5 metre hose has anti-twist protection, so it tangles less easily.
  • Easy to clean: you rub limescale off the silicone nozzles with a finger.

Who is this set for?

For anyone who wants to refresh their shower in one go, for example after moving house, with an old hose or when your bathroom deserves a new look. Want filtered water too? Then choose the Besjaar Shower Head with Hose and Filter. Is your hose still fine? Then the Besjaar Luxury Hand Shower is enough.

Specifications

Spray settings3 (rain, massage, power)
Water useNo more than 8 litres per minute
Diameter13 cm
Hose1.5 m, with anti-twist protection
FinishChrome
In the boxShower head, shower hose, 2 washers, water-saving insert

How to fit the set

  1. Unscrew the old hose from the tap and the old shower head from the hose.
  2. Place a new washer in both connections of the new hose.
  3. Screw the hose hand-tight onto the tap and the shower head hand-tight onto the hose.
  4. Turn the shower on briefly and check that everything stays dry.

No tools needed. More tips in replacing a shower head in 5 minutes.

Frequently asked questions

How long is the hose?

The hose is 1.5 metres long. That's enough for most showers with a slide rail or wall bracket.

Does this set include a filter?

No. If you want filtered water, choose the Besjaar Shower Head with Hose and Filter.

Do I need tools?

No. You screw the hose and shower head on hand-tight with the washers provided.

View the Besjaar Rain Shower with Hose or discover all Besjaar shower heads.

Besjaar makes shower heads and filters for Dutch bathrooms, from Assen. Better water, every day.

Besjaar shower heads

Ready for a better shower?

Water-saving, high pressure, with or without filter. Fitted yourself in five minutes.

Shop Besjaar shower heads →

More guides

← Back to News